Sliding bushing material SF-3NY. A special nylon layer, sintered on a steel or bronze band is characterized by the following advantages towards the characteristics of the POM material:

wear-resistant, heat-resistant (no problem to use until max. 160 C°), extended lifetime.


Support meterail Steel backing 0.4-2.2mm
Intermediate layer Porous bronze 0.2-0.3mm
Sliding layer POM with fiber 0.3-0.5mm
Plating Tin plating 0.005mm or Copper plating 0.008mm


Technical Data

Limit Value(Oil) 2.8 N/mm² × m/s
Friction Coefficient 0.0     0.2
Temperature Range -°C     +160°C
Resilience 80 N/mm²
Sliding Speed Limit 2.5 m/s