JDB-40 has Very good performance Under low load. Not suitable for middle or high load. A typical cost saving material. can substitute JDB-2 to be applied in the position without high requirements such as die guider, plastic injection machines etc.

Base material HT250
Material hardness 180-230HB
Maximum temperature 400°C
Max Load Capacity P 60N/mm²
Coefficient of friction u <0.16





Solid Lubricant

Solid Lubricant Cu Sn
SL1 High purity graphite + additives Good wear resistance and chemical stability, the use of temperature <400°C Used in general machinery, used in the atmosphere
SL4 PTFE + additivesl Very low coefficient of friction and good moisture, the use of temperature <300°C Used in water, sea water lubrication, such as ships, hydraulic arc gate, turbine, pharmaceutical beverage machinery.

Alloy Material

Corresponding Brands/Type JDB-10 JDB-20 JDB-30 JDB-40 JDB-50
China Brands GB1776-87 ZCuZn25Al6Fe3Mn3 ZCuSn6Zn6Pb3 (steel)+ZCuSn6Zn6Pb3 GCr15 HT250
International ISO1338 GCuZn25Al6Fe3Mn3 GCusn6Zn6Pb3 (steel)+CuSn6Zn6Pb3Fe3Ni5 B1 -
Germany DIN G-CuZn25Al5 GB-CuSn5Zn5Pb5 (steel)+CuSn6Zn6Pb3Ni 100Cr6 -
Japan JIS HBsC4 BC6 BC6 SUJ2 FC250
America ASTMUNS C86300 C83600 C83600 52100 Class40
England Standard HTB2 LG2 LG2 - -

Technical Data

Performance index/Type JDB-10 JDB-20 JDB-30 JDB-40 JDB-50
Max Move Load Capacity 100 60 70 250 60
Max Sliding Speed dry0.4 oil0.5 2 2 0.1 0.5
Max PV Value Limit 3.8 0.5 0.6 2.5 0.8
Density 8.0 8.0 7.6 7.8 7.3
Tensile Strength >600 >250 >500 >1500 >250
Elongation >10 >4 >10 - -
Hardness >210 >80 >80 HRC>55 160
Max Woking Temperature 300 350 300 350 400
Friction coefficient

Oil Lubrication:0.03

Dry Friction:0.16