JF-720 Bimetal sliding bearings are made from bronze and steel alloy. The soft bronze inner layer can provide good lubricating performance with oil grease, hard steel back can provide good support on the whole bearing and cut down the cost.
These bearings are primarily used for bearing arrangements where heavy loads have to be supported and where rotational or oscillating movements are relatively slow.
|Max Load Capacity P||130N/mm²|
Joint Types of JF Wrapped Bushes
JF dual-metal self lubricating bearings tank shape
|Material Trademark||Alloy Composition||Alloy Hardness|
|Max Load Capacity P(N/mm²)||150||130||120||100||150|
|Max Sliding Speed(Oil Lubrication)V(m/s)||5||10||15||25||5|
|Max PV Value Limit(Grease)||2.8||2.8||2.5||-||2.8|
|Max PV Value Limit(Oil)||10||10||8||6||-|
|Material Trademark||Using Conditions||Use Occasions|
|JF-800||High resistance to fatigue strenth and load capacity,with high shock resistance good wearing and good corrosion resistance.||Fit for middle load,high speed,bushes,washer and connecting rod bearing in internal combustion engine used in machinical equipment and high shock bushing.|
|JF-720||Good resistance to fatigue strength and high load capacity,good performance of sliding,liable to be corrupted by lubricationg oil.||Middle load middle speed,principle axis of internal combustion engine.|
|JF-700||Good resistance to fatigue strength,load capacity,shock resistance.||Principle axis of internal combustion engine, connecting rod bushing.|
|JF-20||Good performance of anti-seizing,covering eyewinker, soft alloy be plated on working surface.||High speed, middle or low load,principle axis internal combustion engine.|
|JF-930||Moderate fatigue strength, and load capacity, good wrrosion resistance good performance of bearing sliding.||High speed, low load, internal combustion engine half bearing,bushing used in compressing and refrigerating machine.|