SlidingBearingSelf-lubricating
产品目录

产品导航
联系方式
0573-84585696 0573-85210684 info@channovprecision.com
Bronze Bearing Wrapped > FB090 Bronze Bush
产品名称:FB090青铜轴承/轴套/衬套/轴瓦/翻边套/止推垫片/球碗
产品编号:

产品简介

1.嘉兴创诺生产的FB090青铜轴承采用特殊配方的高密度铜合金带材料为基体,表面可以按用户要求扎制菱形或半球形油穴、油糟。具有密度高、承载压力大、耐磨性能好、使用寿命长等优点,以取代传统的铸造铜套,可以缩小机械体积,降低成本。FB090已广泛应用于起重机械、建筑机械、汽车拖拉机底盘、机床工业及采矿机械中,还可以制成轴瓦、翻边套、止推垫片和球碗等形式。 基体材质:CuSn8P0.3 硬度:HB90~120 最大承载压力:75N/mm2 适用温度范围:-80~200 摄氏度 最高滑动速度;2.5m/s 允许最高PV值: 16N/mm2.m/s


产品描述

Wrapped-Bronze-Bushing-FB090-FB091-FB092-FB093.pdf

 Product Code: FB090 Wrapped Bronze Bearings, CuSn8P, Diamond oil pocket

Descriptions

1. Material

Chemical Composition (%)

Type

CuSn8P

Cu = 91.3%  Sn = 8.5%  P =0.2%

Lead Free

CuPb10Sn10

Cu = Balance. Sn = 9~11%, Pb=9~11%

With Lead

2. With diamond oil pocket

3. Lead-free & Low-maintenance

Possible Applications

Industrial: Widely used in construction machinery, agricultural machinery and so on.

Advantages

1. Lead-free and fully recyclable. Less expensive than machined bushing.
2. Minimal space required.
3. Lighter in weight than machined bushing or roller bearing.
4. High stability under load, therefore particularly suitable for oscillating bearing.
5. Lubrication grooves are coined into the metal, and any shape desired is possible.
6. Grease depots for long-term lubrication.

Flanged bushing offer the following additional advantages:

1. A single bushing and take both radial and axial forces.
2. A single bearing element is needed to replace both thrust washer and cylindrical bushing.
3. High stability.
4. No fixing of thrust washers.

 Physical and Mechanical Properties

Maximum Operating Temperature Tmax

280

°C

Minimum Operating Temperature Tmin

-200

°C

Maximum Static Load Psta,max

140

N/mm2

Maximum Dynamic Load Pdyn,max

140

N/mm2

Maximum Dry Sliding Speed V

2.5

m/s

 Available Forms

 FB090-1

 FB090-2

 FB090-3

 FB090-4

Cylindrical Bush

Flanged Bush

Thrust Washer

Plate


新品推介
111 222 333 444 555 666 777 888
地址:No.71 Xinsheng Development Zone,Jiashan County,Jiaxing City,China
电话:0573-84585696  传真:0573-85210684  邮箱:info@channovprecision.com
© 2019嘉兴创诺精密五金有限公司 Supported by elut.cn